DIY Appliance Repair Tips

Wait! Before you get the itch to call an appliance repair in Fort Worth for assistance, you should be able to keep your household appliances running correctly with the help of the troubleshooting tips in this post.

1. Smelly Washing Machine

The presence of a foul odor in a washing machine defeats the reason for the appliance! If you’re trying to get your laundry items so that they are fresh and clean, but your washing machine will not cooperate, run an cycle with no clothes/laundry in hot water with two cups of white vinegar and 1/2 cup of baking soda to remove the unpleasant odor. This problem frequently occurs in front-loading washing machines. To eliminate smells in the future, prop the door open between cycles so it will dry out.

2. Inefficient Refrigerant

A lukewarm refrigerator in the kitchen is not a good sign. A warm refrigerator definitely will not keep beverages cold, and the food on the inside could also be on the verge of spoiling! In several cases, your refrigerator will not need professional repair; it might just need to be cleaned out. Or the coils on the rear of the unit need cleaning.

Unplug the refrigerator and drag it far from the wall before vacuuming the coils. If you do not notice instant cooling improvement, it is best to call a professional appliance repair company in Fort Worth for a diagnosis.

3. Clicking Igniter on Stove

If the igniter on a gas-powered stove continues to click and the burner does not light, inspect to make certain the burner top is in place and correctly aligned. You might experience this issue if you’ve recently had a boil over or spill on the top of your stove.

If that is not the case, the reason is likely to be a dirty igniter. To clean , remove the burner lid and dust off any loose debris. You can use a clothes pin to pick dirt from the grooves. If that doesn’t repair the issue, it’s safest to not take a lighter apart unless you have the right training; in this case enlist a professional appliance repair company to diagnose the issue.

4. Broken Garbage Disposal

A sink’s garbage disposal includes self-protection in the form of an overload trip switch. If it is clogged, overheats, is left on for too much time, or has a different problem, the garbage disposal might just need to be reset instead of replaced. Be sure the switch is turned OFF. Next, locate the reset button on the disposal beneath the sink and then press the button. If the switch won’t stay pushed in, wait 10 minutes and then press it again. Next, turn on the water and then press the button on.

If the disposal is clogged with debris and you the only thing you hear is a humming noise instead of the grinding of waste, you could need to manually unwind the blades with a hex key tool to clear the clog. Now, push in the reset switch to get the garbage disposal working again. If the previous tips do not get the disposal working like it is supposed to, don’t succumb to the temptation to put your arms down in the disposal to figure things out. Be smart and set up service with a professional appliance service in Fort Worth.

5. No Power from Outlet

In a kitchen or bathroom, your electrical outlets need to be installed with GFCI switches in order to protect homeowners from harm in wet areas. If a GFCI electrical outlet isn’t providing power, push the red reset switch to see if that will restore juice.

If it does not, or if you’re trying a typical outlet, make sure that a breaker hasn’t been tripped in the home’s circuit breaker box. If you are unsure if a breaker was tripped, flip it so it is in the OFF position and back into the ON position. Remember, safety near electricity is critical. If you have concerns, call a professional technician.

6. Wobbling Washing Machine

A shaking washer will create a startling racket and isn’t a productive method to clean clothing. If yours is suddenly shaking around, the machine may be broken down. In order to repair this problem, turn the legs on the washer to lower or lift each of the corners until it is balanced. One other possible case is the appliance is not balanced. Lift open the lid and move around the clothes so that they are more evenly dispersed in the drum of the washer.

Doing this will help the washing machine to not have to work as hard. If you do try to move around the laundry once or twice to no avail, don’t ignore the issue. You could have a loose motor or drum mount to repair, which is easy enough for a professional to fix. But if you continue to operate your washing machine with this problem could break other pieces and lead to a more significant repair later.

Call for Help

If these suggestions fix your issues, you can schedule service from F&S Fort Worth Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts